Intermec IF2 IF2 Network Reader User Manual - Page 37
Network Configuration, Ethernet, Con Common Network Settings
View all Intermec IF2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Chapter 2 - Configure Network Settings To configure Ethernet settings 1 From the menu, click Network Configuration or Ethernet in the left pane. The Ethernet screen appears. If DHCP is enabled, you see this screen: If DHCP is disabled, the current values for IP address, subnet mask, and router appear in entry fields: 2 Configure the Ethernet settings. For help, see the next table. Note: Different settings appear in this screen depending on the current DHCP mode for the IF2. If you need to configure other network settings such as DNS addresses and suffixes or a SYSLOG destination, see "Configure Common Network Settings" on page 25. IF2 Network Reader User Manual 23
Chapter 2 — Configure Network Settings
IF2 Network Reader User Manual
23
To configure Ethernet settings
1
From the menu, click
Network Configuration
or
Ethernet
in the
left pane
.
The Ethernet screen appears.
If DHCP is enabled, you see this screen:
If DHCP is disabled, the current values for IP address, subnet
mask, and router appear in entry fields:
2
Configure the Ethernet settings. For help, see the next table.
If you need to configure other network settings such as DNS
addresses and suffixes or a SYSLOG destination, see
“Configure
Common Network Settings” on page 25.
Note:
Different settings appear in this screen depending on the
current DHCP mode for the IF2.