Intermec IF2 IF2 Network Reader User Manual - Page 20
IF2 Port Descriptions
View all Intermec IF2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Chapter 1 - About the RFID Reader IF2 Port Descriptions Port GPIO DC power COM1 Ethernet Description General purpose input/output (GPIO) port that connects the IF2 to industrial controls such as relays or indicators. For more information on the IF2 GPIO interfaces, see "About the GPIO Interfaces" on page 84. Connects the reader to a 12 volt DC power source. Connects the IF2 to a desktop PC for configuration. Use an RS-232 null modem cable (P/N 059167). 10BaseT/100BaseTx port that connects the reader to your Ethernet network. The reader auto-negotiates with the server to set the best data rate. This port uses MDI/ MDI-X auto-switching so you can connect either a standard Ethernet cable or a crossover cable. The Ethernet port also supports POE. To use POE you need an 802.3at compliant power converter. For more information, contact your sales representative. 6 IF2 Network Reader User Manual