Intermec IF2 IF2 Network Reader User Manual - Page 23
To assign an initial IP address, Open a Serial, or USB Connection to the IF2
View all Intermec IF2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Chapter 1 - About the RFID Reader To assign an initial IP address 1 Open a serial connection to the IF2. For help, see "Open a Serial or USB Connection to the IF2" on page 64. 2 Type config and press Enter, and then type config again in the Password field and press Enter. The IF2 Initial Configuration screen appears. 3 If DHCP is enabled, press D. DHCP is disabled and the Ethernet Configuration Options screen appears. IF2 Network Reader User Manual 9
Chapter 1 — About the RFID Reader
IF2 Network Reader User Manual
9
To assign an initial IP address
1
Open a serial connection to the IF2. For help, see
“Open a Serial
or USB Connection to the IF2” on page 64.
2
Type
config
and press
Enter
, and then type
config
again in
the
Password
field and press
Enter
. The IF2 Initial Configuration
screen appears.
3
If DHCP is enabled, press
D
. DHCP is disabled and the Ethernet
Configuration Options screen appears.