Intermec IF2 IF2 Network Reader User Manual - Page 22
How to Communicate with the IF2, Assign an Initial IP Address - default ip address
View all Intermec IF2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Chapter 1 - About the RFID Reader How to Communicate with the IF2 By default, the IF2 is configured to be a DHCP client and accepts offers from any DHCP server. Therefore, the IF2 will work out of the box if you connect it to your network and use a DHCP server to assign it an IP address. In this case, you configure the IF2 using the web browser interface from a desktop PC. For help, see "Use the Web Browser Interface" on page 11. However, if you are not using a DHCP server to assign an IP address, you use a serial communications program such as HyperTerminal to assign a static IP address. For help, see the next section, "Assigning an Initial IP Address." After the IF2 has been assigned an IP address, connect it to your network and then complete the configuration by using a web browser interface from a desktop PC. For help, see "Use the Web Browser Interface" on page 11. Assign an Initial IP Address Follow this procedure to assign an initial IP address to the IF2. After you assign the IP address, connect the IF2 to your network and use the web browser interface to complete the configuration. 8 IF2 Network Reader User Manual