Intermec IF2 IF2 Network Reader User Manual - Page 79
Open a Serial Connection to the IF2, Assign an Initial IP Address,
View all Intermec IF2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Chapter 5 - Manage, Troubleshoot, and Upgrade the IF2 Open a Serial Connection to the IF2 If you are opening a serial connection to the IF2, you need: • a null-modem cable (P/N 059167). • a communications program such as HyperTerminal. Note: If you have Microsoft ActiveSync running on your desktop PC, disable ActiveSync to make the serial port available. To connect to the IF2 via the serial port 1 Connect the null-modem cable from the serial port on the IF2 to a serial port on your PC. 2 Start the communications program and configure the serial port communications parameters to: • Bits per second: 115200 • Data bits: 8 • Parity: None • Stop bit: 1 • Flow control: None 3 Connect the IF2 to power. The IF2 boots as soon as you apply power. In about a minute, the message "Loading System" appears as the IF2 initializes, and in another minute or two the login message appears. The serial connection is established. From here you can do these tasks: • You can assign an initial IP address to the IF2 for configuration. For help, see "Assign an Initial IP Address" on page 8. IF2 Network Reader User Manual 65