Intermec IF2 IF2 Network Reader User Manual - Page 24
Use the Web Browser Interface on Connect, the IF2 to Your Network - default ip
View all Intermec IF2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Chapter 1 - About the RFID Reader 4 To set the IP address, press 1 and enter the static IP address in the entry field. 5 Press Enter. The static IP address is set. If you do not need to set the subnet mask or IP router values, you can now continue to configure the IF2 through the web browser interface. For help, see "Use the Web Browser Interface" on page 11. If you need to change the values for subnet mask or the IP router, continue with the next step. 6 To set the subnet mask, press 2 and enter the subnet mask value in the entry field. Press Enter to save the changes. To set the IP router address, press 3 and enter the IP router address in the entry field. Press Enter to save the changes. 7 (Optional) To change the Ethernet link speed, press L and choose a link speed from the list of options: Ethernet Link Speed Options To choose this speed: Auto detect (default) 100 Mbps - full duplex 100 Mbps - half-duplex 10 Mbps - full duplex 10 Mbps - half duplex Keep the current selection and close this dialog box Press: A 1 2 3 4 Q 8 Press Q to close the Initial Configuration screen. 9 Disconnect the null-modem cable from the IF2. The IF2 is now ready to be connected to your network. See "Connect the IF2 to Your Network" on page 16. 10 IF2 Network Reader User Manual