Intermec IF2 IF2 Network Reader User Manual - Page 60
View the BRI Server Log, BRI Server Parameter Descriptions
View all Intermec IF2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Chapter 3 - Develop and Use RFID Applications 2 Change BRI server settings as needed. For help, see the next table. 3 Click Activate Changes to save your changes and immediately make them active. BRI Server Parameter Descriptions Parameter Description Enable External BRI Connections BRI TCP Port Enable Logging Enable BRI on serial port Enables/disables external TCP connections to the BRI server. If this check box is not checked, BRI applications will not be able to connect to the IF2. Specifies the TCP port used for incoming connections to the BRI server. This port must be unique for all TCP services running on the IF2. Valid range is 2189 to 65535. Default is 2189. Enables/disables logging of BRI server events. For more information on logging, see the next section. Enables/disables sending BRI commands through the serial port. View the BRI Server Log If you enable logging, you can see a list of BRI server events. You can save the logfile as a .txt file. To enable BRI server logging and view the logfile 1 Enable BRI logging as described in the previous section, "Configure the BRI Server" on page 45. 46 IF2 Network Reader User Manual