Intermec PC23d PC23 and PC43 Desktop Printer User Manual - Page 116

Chapter 5 - Troubleshoot the Printer 7 Change alert settings as necessary. When you are finished, click Save. To restore default settings for all alerts on the page, click Default Settings. Maintenance and Error Alert Messages Use these tables to understand and troubleshoot some common error alerts you may receive and how to fix them. Maintenance and Error Alert Messages Message Description and Solution Label Not Taken Printing has been stopped because a label is obstructing the label taken sensor. Remove the label to resume printing. Printhead Lifted Lower the printhead. Out of Ribbon Load ribbon in the printer. Out of Media Load media in the printer. Ribbon Installed The printer is configured as a direct thermal printer and thermal transfer ribbon is installed. Remove the ribbon or configure the printer for thermal transfer media. Printer in Pause Mode A print job is paused from the front panel. Press the Print button to resume printing. Printer in Menu Mode A user entered a menu from the front panel. Press the Home button to return to the Ready screen. Application Break Fingerprint only. An application breaks uncontrolled. Print Job Complete A print job has been successfully completed. Odometer (Printer) The printer has reached a limit set in the Odometer (Printer) setting in Maintenance Alerts for the amount of media to print before being alerted. Odometer (User Resettable) The printer has reached a limit set in the Odometer (User Resettable) setting in Maintenance Alerts for the amount of media printed since the last reset. Printhead Too Hot The printhead is overheated and needs to cool down. Wait for printing to resume automatically. Printhead Not Detected The printer is not detecting the printhead. Check the printhead cable. 102 PC23 and PC43 Desktop Printer User Manual