Intermec PC23d PC23 and PC43 Desktop Printer User Manual - Page 165
Serial Port Settings
View all Intermec PC23d manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
Appendix B - Default Settings Serial Port Settings This section describes the serial port settings. To view these settings: • From the printer Main Menu, select Settings > Communications > Serial > COM1. • From the printer web page, click the Configure tab, Communications > Serial. Note: These settings are not accessible unless the printer has a serial connection to a PC. Serial Port Settings Setting Baud Rate Data Bits Parity Stop Bits Hardware ENQ/ACK XON/XOFF To XON/XOFF From Description Default Transmission speed in bits per second (bps) for the serial port. 115200 Number of bits that define a character or 8 byte. Specifies how the printer checks the integrity of the transmitted data. None Number of bits sent at the end of every 1 character to allow the receiving signal hardware to detect the end of a character and to resynchronize with the character stream. Specifies if hardware flow control Disable (RTS/CTS) is used to manage the rate of data transmission between the device and the host. Specifies if software flow control Disable (ENQ/ACK) is used to manage the rate of data transmission between the device and the host. Specifies if software flow control Disable (XON/XOFF) is used to manage the rate of data transmission to the host. Specifies if software flow control Disable (XON/XOFF) is used to manage the rate of data transmission from the host. PC23 and PC43 Desktop Printer User Manual 151