Intermec PC23d PC23 and PC43 Desktop Printer User Manual - Page 73
Connect the Printer to Power - thermal printer
View all Intermec PC23d manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Chapter 2 - Set Up the Printer 8 Close the printer lid until it snaps shut. 9 If you have already configured the printer for thermal transfer printing, continue with the next step. Otherwise, from the printer Main Menu, select Settings > Printing > Media > Print Method > Ribbon (TTR). For an icon printer, you must use the printer web page or Intermec PrintSet 5 to configure thermal transfer printing. 10 Save your changes. Connect the Printer to Power Caution: Use only the AC power adapter supplied with the printer. The use of a power adapter not approved by Intermec voids the product warranty and may damage the printer. 1 Connect the power adapter to the power port on the rear of the printer. 2 Connect the power adapter to AC power. When the adapter is connected to AC power, the green LED in the adapter connector turns on and stays on. PC23 and PC43 Desktop Printer User Manual 59