Intermec PC23d PC23 and PC43 Desktop Printer User Manual - Page 44
Battery Precautions, Charge the Battery, LEDs: Battery Base Not Connected to AC Power, Continued
View all Intermec PC23d manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Chapter 1 - About the Printers LEDs: Battery Base Not Connected to AC Power (Continued) LEDs Battery Charge Level Battery is 0% to 10% charged. Battery out of operating temperature range. Battery error. Battery Precautions Follow these precautions when using the printer with the Battery Base: • Use only the battery supplied by Intermec. Risk of explosion if battery is replaced by an incorrect type. Use of another battery may present a risk of fire or explosion. • The battery may present a fire or chemical burn hazard if mistreated. • Do not disassemble the battery, heat above 100 °C (212 °F), or incinerate. • Dispose of any used batteries according to the instructions that came with the battery. Charge the Battery When the battery base is connected to AC power, the LEDs indicate the charging status of the battery. 1 Make sure that the PC43d is properly installed on the base. For help, see the PC43d Battery Base Installation Instructions. 2 Connect the power cord from the battery base to the printer. 30 PC23 and PC43 Desktop Printer User Manual