Intermec PC23d PC23 and PC43 Desktop Printer User Manual - Page 168
System Maintenance Alert Settings
View all Intermec PC23d manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 168 highlights
Appendix B - Default Settings System Maintenance Alert Settings This section describes the system maintenance alert settings, such as the odometer distance. To view these settings: • From the printer Main Menu, select Settings > System Settings > Maintenance Alerts. • From the printer web page, click the Configure tab, System Settings > Maintenance Alerts. System Maintenance Alert Settings Setting Description Default Odometer (User Resettable) Odometer (Printer) Replace Printhead Clean Printhead Faulty Dot Sets the length of media (in meters) that the 0 printer prints before the Odometer (User Resettable) alert is sent, if this alert is configured. Unit of measurement is defined in the Unit of Measure parameter. Range is 0 to 4294967295. Sets the length of media (in meters) that the 0 printer prints before the Odometer (Printer) alert is sent. Unit of measurement is defined in the Unit of Measure parameter. Range is 0 to 4294967295. Sets the length of media (in meters) that the 0 printer prints before the Replace Printhead alert is sent, if this alert is configured. Unit of measurement is defined in the Unit of Measure parameter. Range is 0 to 4294967295. Sets the length of media (in meters) that the 0 printer prints before the Clean Printhead alert is sent, if this alert is configured. Unit of measurement is defined in the Unit of Measure parameter. Range is 0 to 4294967295. Sets the number of faulty dots on the 0 printhead before the Faulty Dot alert is sent, if this alert is configured. Range is 0 to 4294967295. 154 PC23 and PC43 Desktop Printer User Manual