Intermec PC23d PC23 and PC43 Desktop Printer User Manual - Page 62
About the Label Dispenser, Recommended Feed Adjust Values for the Label Dispenser
View all Intermec PC23d manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Chapter 2 - Set Up the Printer About the Label Dispenser The label dispenser accessory, which includes the Label Taken Sensor, removes the liner from self-adhesive label stock as each label is printed. You manually remove the label at the front of the printer. After you load media, you need to configure the feed adjust settings. You may need to adjust the recommended values slightly depending on your media type, supply method, and roll sizes, or because of individual differences between printers. Note: Feed adjust values for simulator command languages like ESim, ZSim, and DSim are preset. Recommended Feed Adjust Values for the Label Dispenser Printer PC23d PC43d PC43t Setting Start Adjust Stop Adjust Start Adjust Stop Adjust Start Adjust Stop Adjust 203 dpi 300 dpi Distance -117 -173 -14.70 mm (-0.58 in) 3 5 -0.46 mm (0.02 in) -126 -186 -15.8 mm (-0.62 in) 2 3 0.3 mm (0.01 in) -125 -185 -15.7 mm (-0.62 in) 16 24 2.1 mm (0.08 in) 48 PC23 and PC43 Desktop Printer User Manual