Invacare MVPS Owners Manual - Page 32

Back, Folding/unfolding The Back, Folding

Page 32 highlights

BACK SECTION 4 BACK Section 4- Back includes the following: Folding/Unfolding the Back Adjusting the Back Height Adjusting the Back Angle - Square Rear Frame Installing/Removing the Chest Positioning Strap Installing/Adjusting Stroller Handles Installing and Removing a Seating System WARNING After ANY adjustments, repair or service and BEFORE use, make sure all attachment hardware is tightened securely - otherwise, injury or damage may result. FOLDING/UNFOLDING THE BACK (FIGURE 1) WARNING Make sure the back is locked securely BEFORE using the wheelchair otherwise injury can occur. FOLDING 1. Pull the actuator of the locking mechanism UP towards the top of the wheelchair. REAR OF WHEELCHAIR Back Cane 2. While holding the actuator of the locking mechanism, push the back DOWN. NOTE: The back can be pushed towards the anterior (front) or the posterior (rear) of the wheelchair depending on need. UNFOLDING Actuator FRONT OF WHEELCHAIR 1. To lock the back into place, pull UP until there is an audible click. FIGURE 1 - FOLDING/ UNFOLDING THE BACK 2. Push on the back to make sure it is locked in place. MVP™ & MVP jr.™ 32 Part No. 1106638

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60

MVP± & MVP jr²±
32
Part No² 1106638
Section 4- Back includes the following:
Folding/Unfolding the Back
Adjusting the Back Height
Adjusting the Back Angle - Square Rear Frame
Installing/Removing the Chest Positioning Strap
Installing/Adjusting Stroller Handles
Installing and Removing a Seating System
WARNING
After ANY adjustments, repair or service and BEFORE use, make sure all
attachment hardware is tightened securely - otherwise, injury or damage may
result±
FOLDING/UNFOLDING THE BACK (FIGURE 1)
WARNING
Make sure the back is locked securely BEFORE using the wheelchair -
otherwise injury can occur±
FOLDING
Pull the actuator of the locking mecha-
nism UP towards the top of the wheel-
chair±
While holding the actuator of the locking
mechanism, push the back DOWN±
NOTE: The back can be pushed towards the an-
terior (front) or the posterior (rear) of the wheel-
chair depending on need±
UNFOLDING
To lock the back into place, pull UP until
there is an audible click±
Push on the back to make sure it is locked in place±
FIGURE 1 - FOLDING/
UNFOLDING THE BACK
Back Cane
Actuator
FRONT OF
WHEELCHAIR
REAR OF
WHEELCHAIR
SECTION 4
BACK
BACK