Invacare MVPS Owners Manual - Page 33
Adjusting The Back Height, Adjusting The Back Height
![]() |
View all Invacare MVPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
BACK BACK SECTION 4 ADJUSTING THE BACK HEIGHT (FIGURE 2) NOTE: There are four (4) height ranges of back canes available - 14-18-inches (10° bend and straight back canes), 10-14-inches (sportster without push handles), 12-16-inches (straight with push handles) and 20-inches (10° bend with push handles). NOTE: The back height of the 20-inch back cane is not adjustable. The following steps refer to 1418-inch, 10-14-inch and 12-16-inch back canes only. 1. Remove the two (2) back height adjustment screws and locknuts that secure the two (2) back canes to the wheelchair frame. 2. Reposition the back canes to one (1) of five (5) height adjustment holes: Original Back Height (in inches) *HOLE # 1 2 3 4 5 14-18 14 15 16 17 18 10-14 10 11 12 13 14 12-16 12 13 14 15 16 *Holes numbered for reference only. (There are no numbers on the wheelchair frame or back canes.) NOTE: Both back canes should be adjusted to the same adjustment hole. 3. Reinstall the two (2) back height adjustment screws and locknuts that secure the back canes to the wheelchair frame. Back Upholstery Back Cane Back Cane Back Height Adjustment Screw NOTE: Fixed (non-folding) back cane shown. HOLE 1 2 3 4 5 FIGURE 2 - ADJUSTING THE BACK HEIGHT Wheelchair Frame Part No. 1106638 33 MVP & MVP jr.
![](/manual_guide/products/invacare-mvps-owners-manual-7117d1d/33.png)