Invacare MVPS Owners Manual - Page 49
adjusting T-ARM transfer assists and/or side guards, ADJUSTING T-ARM SOCKETS
![]() |
View all Invacare MVPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
ARMS ARMS SECTION 6 T-Arm Hex Screws and Washers Slot Locking Lever T-Arm Clamp Hex Screws and Washers T-Arm Socket FIGURE 9 - ADJUSTING T-ARM SOCKETS ADJUSTING T-ARM TRANSFER ASSISTS AND/OR SIDE GUARDS (FIGURE 10) 1. Remove the T-arm from the wheelchair. Refer to INSTALLING/REMOVING T-ARMS in this section of the manual. 2. Remove the two (2) socket screws that secure the side guard to the bottom clamp. NOTE: Adjusting the side guards will directly affect the position of the transfer assist. 3. Perform one (1) of the following: SMALL SIDE GUARDS - Move the bottom clamp up one (1) of two (2) mounting positions in the side guard. LARGE SIDE GUARDS - Move the bottom clamp up one (1) of three (3) mounting positions in the side guard. 4. Re-secure the side guard to the bottom clamp with the two (2) socket screws. Torque to 80-90 in./lbs. 5. Install the T-arm onto the wheelchair. Refer to INSTALLING/REMOVING T-ARMS in this section of the manual. Side Guard T-Arm Transfer Assist Socket Screws Bottom Clamp FIGURE 10 - ADJUSTING T-ARM TRANSFER ASSISTS AND/OR SIDE GUARDS Part No. 1106638 49 MVP & MVP jr.
![](/manual_guide/products/invacare-mvps-owners-manual-7117d1d/49.png)