JVC DR-HD100-80 User Guide - Page 62
Mounting the DR-HD100 (Macintosh
View all JVC DR-HD100-80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
DR-HD100: Using with a Computer Mounting the DR-HD100 (Macintosh) Step 1: Start the Mac computer and connect the DR-HD100's COMPUTER I/O port to the computer using a standard 6-pin to 6-pin FireWire cable. When mounted, the DR-HD100 should appear on the computer's desktop as shown below: Step 2: Step 3: The DR-HD100 appears as a FAT32 volume with a PC label. Locate the DR-HD100 on the desktop and open it up. Open the folder with the most recent date code (for example, "20050127-110345-01"). It should look similar to the following: Before Connecting DR-HD100 to a Computer If clips have been assigned to a Reel folder: perform an Organize Reels before connecting the unit to a computer. 46 ProHD DR-HD100 Portable DTE Recorder
DR-HD100: Using with a Computer
46
ProHD DR-HD100 Portable DTE Recorder
Mounting the DR-HD100 (Macintosh)
Step 1:
Start the Mac computer and connect the DR-HD100’s
COMPUTER I/O
port to the computer using a standard 6-pin to
6-pin FireWire cable.
When mounted, the DR-HD100 should appear on the computer's
desktop as shown below:
The DR-HD100 appears as a FAT32 volume with a PC label.
Step 2:
Locate the DR-HD100 on the desktop and open it up.
Step 3:
Open the folder with the most recent date code (for example,
“20050127-110345-01”). It should look
similar to the
following:
Before Connecting DR-HD100 to a Computer
If clips have been assigned to a Reel folder: perform an
Organize
Reels
before connecting the unit to a computer.