JVC DR-HD100-80 User Guide - Page 70
DISP (display) Information Fields, function button to display current operation - bracket
View all JVC DR-HD100-80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
DR-HD100 Functions 10. Reel Display In Record or Playback modes, this item displays the particular REEL that a clip is located in or, has been marked to. If in PLAY FROM > REEL LIST mode, the REEL appears in brackets for example, [REEL]. This area is blank if NO REEL has been selected. 11. DISP information field that displays data type. 12. DISP information field that displays current data. DISP (display) Information Fields Use the DISP function button to display current operation information fields 11 and 12. The data shown depends on the mode of operation, i.e. DV or HD Recorder. Pressing the DISP button advances the display to the next category of information. Below is a table of the data types and data available with DISP. Field Number 11 12 11 12 11 12 11 Data Type / Data Description COUNTER Shows frame count of current video clip during record or playback. REMAINING Record: counts down number of available frames remaining, as time, on a specific disk. Playback: displays time remaining of the current clip. DV (NTSC or PAL) or HD (see note following table) The type of timecode displayed in HD RECORDER mode from this screen is defined by the HDV TC TYPE setting, see page 75. Record: displays the external timecode value being generated by a camcorder or other device during a recording session. Timecode mode must be set to EXT TC for this function to operate, refer to "TIME CODE EXT, REC RUN, FREE RUN, REGEN" on page 71. Playback: displays the embedded DV timecode value in a particular track. UB NTSC 54 ProHD DR-HD100 Portable DTE Recorder