JVC DR-HD100-80 User Guide - Page 80

Setting Up Master and Slave DR-HD100, DV I/O, Master, HDD Mode, USE EXT DR-HD, Computer I/O, Slave

Page 80 highlights

DR-HD100 Functions Setting Up Master and Slave DR-HD100 4 1 Master DR-HD100 2 STOP 1 - 001 COUNTER 00 : 00 : 00 : 00 DISK 1 000min SYNC DISP LOCK Slave DR-HD100 3 CONNECT COMPUTER THEN ENABLE BYPASS SUCCESS EXIT Step 1: Step 2: Step 3: Step 4: Step 5: Connect the camcorder to the master DR-HD, DV I/O connector using the supplied FireWire cable. Master Power on unit. Go to the HDD Mode menu screen and enable USE EXT DR-HD. Connect the DR-HD100s through the units Computer I/O connectors using a 6-pin to 6-pin FireWire cable. Slave Power on the unit Go to the HDD Mode screen and enable DD DRIVE. Master Begin recording or playback using the master DR-HD100. Use DD Drive Mode when Connecting to a PC It is important to take the master DR-HD100 out of USE EXT DR-HD mode before attempting to connect to a computer. To do this, select DD DRIVE from the HDD Mode screen. This returns use of the unit to hard disk mode. 64 ProHD DR-HD100 Portable DTE Recorder

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124

DR-HD100 Functions
64
ProHD DR-HD100 Portable DTE Recorder
Setting Up Master and Slave DR-HD100
Step 1:
Connect the camcorder to the master DR-HD,
DV I/O
connector
using the supplied FireWire cable.
Step 2:
Master
Power on unit.
Go to the
HDD Mode
menu screen and enable
USE EXT DR-HD
.
Step 3:
Connect the DR-HD100s through the units
Computer I/O
connectors using a 6-pin to 6-pin FireWire cable.
Step 4:
Slave
Power on the unit
Go to the
HDD Mode
screen and enable
DD DRIVE
.
Step 5:
Master
Begin recording or playback using the master DR-HD100.
Use DD Drive Mode when Connecting to a PC
It is important to take the master DR-HD100 out of USE EXT
DR-HD mode before attempting to connect to a computer.
To do this, select DD DRIVE from the HDD Mode screen.
This returns use of the unit to hard disk mode.
STOP 1 - 001
COUNTER
00 : 00 : 00 : 00
DISK 1
000min
SYNC
DISP
LOCK
CONNECT
COMPUTER
THEN
ENABLE
BYPASS
SUCCESS
EXIT
Master DR-HD100
Slave DR-HD100
4
3
2
1