JVC GY-HMZ1U GY-HMZ1U ProHD 3D Camcorder 138-page user guide - Page 32
Adjusting Parallax During Recording
View all JVC GY-HMZ1U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
. .. . Recording Adjusting Parallax During Recording When recording 3D images, parallax is automatically adjusted. If the left and right images of an object close to the camera do not appear to be in alignment, or the 3D effect of a distant object is weak, you can make adjustments by bringing the left and right images closer to each other. 0 Parallax can be adjusted when 3D or LR MIX images are displayed on the unit's LCD monitor. "3D VIDEO REC FORMAT (3D mode only)" (A p. 92) 1 Tap k. 2 Tap "MANUAL". AUTO MANUAL 4 Tap "SET" to confirm. SET Caution : 0 Too much parallax may cause the 3D effect to be lost. 0 If you see double images even after parallax adjustment, set the display on the LCD monitor to 2D immediately. Memo : 0 While this unit is equipped with the function to adjust parallax automatically, it may not work properly for the following subjects. - Subjects beyond the recommended shooting distance (especially subjects that are extremely close to the camera) - Numerous subjects of the similar shape arrayed in a line, such as the windows of a building - Straight subjects such as electric wires In these cases, adjust the parallax manually. 0 When the power of this unit is turned off or the mode is switched to playback after parallax is manually adjusted, the "PARALLAX ADJUSTMENT" setting returns to "AUTO". 0 The parallax adjustment screen appears. 0 To set parallax adjustment to auto (default), tap "AUTO". 3 Adjust the parallax. SET 0 To increase the amount of correction, tap "+". Doing so increases the value of the parallax display. 0 To reduce the amount of correction, tap "-". Doing so decreases the value of the parallax display. 32