JVC GY-HMZ1U GY-HMZ1U ProHD 3D Camcorder 138-page user guide - Page 62
Adjusting Parallax During Playback
View all JVC GY-HMZ1U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
. .. . Playback Adjusting Parallax During Playback When playing back 3D images of scenes where there are multiple objects arrayed in a line from near to far, or objects that are extremely close to the camera, you can change the way they appear to the eye. 0 Parallax can be adjusted when 3D or LR MIX images are displayed on the unit's LCD monitor. 1 Tap k. 2 Tap "MANUAL". AUTO MANUAL 0 The parallax adjustment screen appears. 0 To set parallax adjustment to auto (default), tap "AUTO". 3 Adjust the parallax. 4 Tap "SET" to confirm. SET Caution : 0 Too much parallax may cause the 3D effect to be lost. 0 If you see double images even after parallax adjustment, set the display on the TV to 2D immediately. In addition, set the LCD monitor to 2D display accordingly. Memo : 0 While this unit is equipped with the function to adjust parallax automatically, it may not work properly for the following subjects. - Subjects beyond the recommended shooting distance (especially subjects that are extremely close to the camera) - Numerous subjects of the similar shape arrayed in a line, such as the windows of a building - Straight subjects such as electric wires In these cases, adjust the parallax manually. 0 When the power of this unit is turned off or the mode is switched to recording after parallax is manually adjusted, the "PARALLAX ADJUSTMENT" setting returns to "AUTO". SET 0 To increase the amount of correction, tap "+". Doing so increases the value of the parallax display. 0 To reduce the amount of correction, tap "-". Doing so decreases the value of the parallax display. 62