Kenmore 8075 Use and Care Manual - Page 17
Choose your exhaust installation type, Recommended, exhaust installations
View all Kenmore 8075 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Choose your exhaust installation type Recommended exhaust installations Typical installations vent the dryer from the rear of the washer/ dryer. Other installations are possible. A I .......D. Refer to the manufacturer's instructions provided with the vent system. r'[ .... : -i [....... r.....M.. Jr ....... , ..-ff ....... , ( ( B( ........ C _H A. Dryer B. Rigid metal or flexible metal vent C. Clamps D. Wall E. Elbow E Clamps G. Elbow H. Exhaust hood Optional exhaust installations This laundry center can be converted to exhaust out the right or left side. To convert the laundry center, use Side Exhaust Kit Part Number 279823. If your laundry center was previously exhausted from the right or left side, it can be converted to rear exhaust by using standard offset connections. To cover the hole in the side, one of the following plugs can be added: 692790 (white) 3979370 (graphite) 3977784 (biscuit) Follow the instructions in the kit to install. Kits are available from your local Sears store or Sears Service Center. " i \, "-,,j B 1. C A. Loop system with standard elbows B. Loop system with one offset and one standard elbow C. Vent system with one periscope (2" [5 cm] clearance) NOTE: The following kits for close clearance alternate installations are available for purchase. To order, please call 1-800-4-MY-HOME ® (1-800-469-4663). • Over-the-Top Installation: Part Number 26-49900 • Periscope Installation (For use with dryer vent to wall vent mismatch): Part Number 26-49901 - Less than 5" (12.7 cm) mismatch Part Number 26-49908 - 5" (12.7 cm) to 18" (45.7 cm) mismatch Part Number 26-49904 - 18" (45.7 cm) to 29" (73.7 cm) mismatch Part Number 26-49905 - 29" (73.7 cm) to 50" (127 cm) mismatch Special provisions for mobile home installations The exhaust vent must be securely fastened to a noncombustible portion of the mobile home structure and must not terminate beneath the mobile home. Terminate the exhaust vent outside. A B C A. Standard rear offset exhaust installation B. Rear exhaust for offset close clearance connection C. Left or right side exhaust installation Alternate installations for close clearances Venting systems come in many varieties. Select the type best for your installation. Three close-clearance installations are shown. Determine vent path • Select the route that will provide the straightest and most direct path outdoors. • Plan the installation to use the fewest number of elbows and turns. • When using elbows or making turns, allow as much room as possible. 17