Kenmore 8075 Use and Care Manual - Page 5
Installation Instructions - parts
![]() |
View all Kenmore 8075 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
INSTALLATION INSTRUCTIONS Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here. Tools needed: #2 Phillips and flat-blade screwdriver Adjustable wrench that opens to 1" (2.5 cm) or %6" open-end wrench (for adjusting dryer feet) Wire stripper (direct wire installations) Tin snips (for new vent installations) _A" nut driver or socket wrench (recommended) • Caulking gun and compound (for installing new exhaust vent) • Vent clamps • Wood block (for leveling) • Ruler or measuring tape • Level • Knife • Pliers • Scissors Parts supplied: Remove parts package from the washer basket. Check that all parts were included. B C D Parts listed are available from your local Sears store or Sears Service Center. For further information, please call 1-800-4-MY-HOME® (1-800-469-4663). If You Have You Will Need to Buy Laundry tub or standpipe taller than 96" (2.4 m) Sump pump system (if not already available) 1" (2.5 cm) diameter standpipe 2" (5 cm) diameter to 1" (2.5 cm) diameter standpipe adapter, Part Number 3363920 Overhead sewer Floor drain Drain hose too short Standard 20 gal. (76 L) 34" (86.4 cm) tall drain tub or utility sink and sump pump (available from local plumbing suppliers) Siphon break, Part Number 285320, additional drain hose, Part Number 285702 and connector kit, Part Number 285442 Drain hose, Part Number 285664 and connector kit, Part Number 285442 Lint clogged drain Water faucets beyond reach of fill hoses Drain protector, Part Number 367031 2 longer water fill hoses: 6 ft (1.8 m) Part Number 76314, 10 ft (3.0 m) Part Number 350008 E A. Water inlet hoses (2) B. Inlet hose flat washers (4) C. Rear leveling legs (2) D. Front leveling legs (2) G E. Plastic strap F. Drain hose G. Yellow, single wire hose clamp H. Silver, double-wire hose clamp Parts needed: Check local codes, electrical supply and venting, and read "Electrical Requirements" and "Venting Requirements" before purchasing parts. Mobile home installations require metal exhaust system hardware available for purchase from your local Sears store or Sears Service Center. For further information, please call 1-800-4-MY-HOME ® (1-800-469-4663}.
![](/manual_guide/products/kenmore-8075-use-care-manual-9bf00dd/5.png)