Konica Minolta bizhub C25 bizhub C25 Printer / Copier / Scanner User Guide - Page 187
Specifying the Data Location, Saving Data on a Computer Connected (Scan to PC)
View all Konica Minolta bizhub C25 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 187 highlights
7 After all document pages have been scanned, press the Start key. The scanned document is sent to the specified location. d If the Stop/Reset key is pressed while scanning, [JOB CANCEL] appears. To continue scanning, select [NO]. To stop scanning, select [YES]. d To cancel a job where scanning was finished and the data is queued to be sent, refer to "Deleting a Queued Transmission Job" on page 7-32. Specifying the Data Location Select whether the computer or USB memory device is the location where scan data is to be saved. When transmitting via a network, refer to "Specifying the Destination Address (Scan to E-mail/FTP/SMB)" on page 7-12. d If an address has been specified as the destination for the data, [SCAN TO PC] and [SCAN TO USB MEMORY] cannot be selected. Saving Data on a Computer Connected (Scan to PC) Follow the procedure described below to send scan data to a computer connected to this machine. d In order to perform this operation, make sure the TWAIN scanner driver, the printer driver, and LinkMagic (Windows only) have been installed on your computer. d Before performing the Scan to PC operation, be sure that either Link- Magic is activated or the LinkMagic icon appears in the notification area. d The scan settings specified with LinkMagic are given priority. Specify the various settings with LinkMagic. For details, refer to the [Reference Guide] on the Documentation CD/DVD. d The Scan to PC operation can be used only if this machine is con- nected to a computer with a USB cable. 1 In the main screen (Scan mode), press the + or , key to select [SCAN TO], and then press the Select key. 2 Press the + or , key to select [SCAN TO PC], and then press the Select key. 7-10 Scanning With the Machine