Konica Minolta bizhub C25 bizhub C25 Printer / Copier / Scanner User Guide - Page 297
MACHINE SETTING Menu on, e variation.
View all Konica Minolta bizhub C25 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 297 highlights
Symptom Cause Solution Lateral lines or bands appear on image. The machine is not level. The media path is dirty with toner. Place the machine on a flat, hard, level surface. Print several sheets and the excess toner should disappear. One or more of the Remove the toner cartridges and toner cartridges may check for damage. If it is damaged, be defective. replace it. One or more of the imaging units is defective. Remove the imaging units and check for damage. If it is damaged, replace it. Colors look drastically wrong. One or more of the Remove the toner cartridges and verify toner cartridges may that the toner is distributed evenly on be defective. each cartridge roller, and reinstall the toner cartridges. Colors are Gradations are not Set [MACHINE SETTING]/[CALIBRA- not register- adjusted correctly. TION] in the [UTILITY] menu to [ON], ing properly; The front cover is colors are opened during the mixed or calibration. have and then perform the AIDC color calibration. For details, refer to "MACHINE SETTING Menu" on page 2-24. page-to-pag One or more of the Remove the toner cartridges and e variation. toner cartridges may check for damage. If it is damaged, be defective. replace it. The media is moist Remove the moist media and replace from humidity. it with new, dry media. The color has a poor reproduction or has poor color density. One or more of the Remove the imaging units and check imaging units may be for damage. If it is damaged, replace defective. it. If the problem is not resolved, even after all of the above have been performed, contact Technical Support with the error information. 10-38 Solving Problems with Printing Quality