Konica Minolta bizhub C25 bizhub C25 Printer / Copier / Scanner User Guide - Page 313
Be sure to handle the, DIMM by the edges only., You will hear a click when, the DIMM is properly
View all Konica Minolta bizhub C25 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 313 highlights
5 Insert the DIMM at an angle (about 45°) into the connector, making sure that the notch on the unit aligns with the tab on connector, and then press down carefully until it clicks into place. d Be sure to handle the DIMM by the edges only. d You will hear a click when the DIMM is properly placed. 6 Attach the cover, and then tighten the screw. 7 Close the rear cover. 8 Reconnect all interface cables. 9 Reconnect the power cord, and turn on the machine. 10 Declare the additional memory in the Windows printer driver ([Properties]/ [Configure] tab). 11 Print a configuration page ([REPORT/STATUS]/[REPORT]/[CONFIGURA- TION PAGE]) and verify that the total amount of the RAM installed in this machine is listed. 11-6 Dual In-Line Memory Module (DIMM)