Konica Minolta bizhub C25 bizhub C25 Printer / Copier / Scanner User Guide - Page 290
For [Booklet] [Left Binding] and [Right, tact Technical Support.
View all Konica Minolta bizhub C25 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 290 highlights
Symptom Cause Solution With N-up on multiple copies, the output is incorrect. Both the printer For N-up on multiple copies, choose driver and the appli- [Collate] only in the printer driver's cation have been set [Basic] tab. Do not set collation in the for collation. application. Booklet Left Both the printer For [Booklet] ([Left Binding] and [Right and Right driver and the appli- Binding]), choose [Collate] only in the Binding out- cation have been set printer driver's [Basic] tab. Do not set put is incor- for collation. collation in the application. rect. You hear unusual noises. The machine is not level. The tray is not installed correctly. Place the machine on a flat, hard, level surface. Remove the tray that you are printing from and reinsert it completely into the machine. There is a foreign object stuck inside the machine. Turn off the machine and remove the object. If you cannot remove it, contact Technical Support. When copy- A malfunction may ing or scan- have occurred while ning with the paper was being ADF, a band transferred with the appears at ADF. the end of the image or paper (5 to 6 mm). If a band appears in the copy after copying, select a copy density setting that is one level darker. If a band appears in the image after scanning, scan using the original glass. Scanned images are noisy. Resolution is set to Set the scan mode to [PHOTO]. [150x150dpi] while the scan mode is set to [MIX] or [TEXT]. Some areas of the scanned image are missing. Acrobat 8 (Macintosh version) is used for scanning the image. With the Acrobat Scan setting, turn off the OCR and Filtering functions. Solving Other Problems 10-31