Konica Minolta bizhub C654 bizhub C654/C754 Fax Operations User Guide - Page 54
Sending a fax using an additional line ([Select Line]), Using an additional line
View all Konica Minolta bizhub C654 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
4.8 Sending a fax using an additional line ([Select Line]) 4 4.8 Sending a fax using an additional line ([Select Line]) Using an additional line When two lines are operating, you can select a line for sending a fax. Faxes are usually transmitted using an idle line. Lines can be used to transmit faxes according to usages 's situation. Tips - When registering destinations with an address book, you can configure the lines used to transmit faxes in addition to registering fax numbers. - This function cannot be used together with the following functions. - Polling TX, Polling TX (Bulletin Board). Operations required to use this function (for administrators) Configure a specific function for additional line. If you configure a function that differs from the one assigned to the first line, you can use the two lines differently. For details on how to configure the settings, refer to page 11-25. Tips - You cannot specify a line if [Multi Line Usage Settings] is set to [RX Only]. Operation flow 1 Load the original. 2 Tap [Scan/Fax]. 3 Specify the destination. 4 Tap [Application] - [Fax Setting] - [Line Setting]. bizhub C754/C654 4-14