Konica Minolta magicolor 4690MF magicolor 4690 Printer/Copier/Scanner User Gui - Page 142

Specifying the Data Location Select whether the computer or USB memory device is the location where scan data is to be saved. When transmitting via a network, refer to "Specifying the Destination Address (Scan to E-mail/FTP/SMB)" on page 132. " If an address has been specified as the destination for the data, SCAN TO PC and SCAN TO USB MEMORY cannot be selected. Saving Data on a Computer Connected (Scan to PC) Follow the procedure described below to send scan data to a computer connected to this machine. " In order to perform this operation, make sure the TWAIN (or WIA) scanner driver, the printer driver, and LinkMagic (Windows only) have been installed on your computer. " Before performing the Scan to PC operation, be sure that either Link- Magic is activated or the LinkMagic icon appears in the notification area. " The scan settings specified with LinkMagic are given priority. Specify the various settings with LinkMagic. For details, refer to the Reference Guide on the Documentation CD/DVD. 1 In the main screen, press the + or , key to select the current data desti- nation setting, and then press the Select key. 2 Press the + or , key to select SCAN TO PC, and then press the Select key. " The scan data is saved in the folder specified with LinkMagic. For details, refer to the Reference Guide on the Documentation CD/DVD. Saving Data on a USB Memory Device (Scan to USB Memory) Follow the procedure described below to save scan data to a USB memory device plugged into the USB HOST port of this machine. " This machine is compatible with a USB memory device of 4 GB or less. 1 Plug the USB memory device into the USB HOST port of this machine. 2 In the main screen, press the + or , key to select the current data desti- nation setting, and then press the Select key. 130 Scanning With the Machine