Konica Minolta magicolor 4690MF magicolor 4690 Printer/Copier/Scanner User Gui - Page 44

LAMP WARMUP TIME Setting AUTO / FIX Specify the warm-up time for the lamp of the scanner unit. If AUTO is selected, the length of time to recover from Energy Save mode when the machine is turned on is adjusted according to the room temperature. Since the machine cannot be used until its condition is completely stabilized, select this setting, for example, if you wish to scan at a high image quality from the first page. BUZZER VOLUME INITIAL MODE TONER EMPTY If FIX is selected, the machine can be used after lamp warm-up is finished. With a low room temperature, the quality of the first page of a copy or scanned image may not be as good as if AUTO was selected. Setting OFF / LOW / HIGH Select the volume of the sound produced when a key is pressed and of the alarm that is sounded when an error occurs. Setting COPY / FAX Specify the default mode when the machine is turned on or when all settings in the control panel return to their default settings. Setting STOP / BW CONTINUE Select whether or not printing, copying and faxing stop when the toner has run out. If STOP is selected, printing, copying and faxing stop when the toner runs out. TONER NEAR EMPTY AUTO CONTINUE If BW CONTINUE is selected, printing, BW copying and faxing do not stop when the toner runs out. Setting ON / OFF When the toner is nearly run out, a warning message appears. Setting ON / OFF Select whether or not printing continues when a size error occurs during printing. 32 Configuration Menu Overview