Konica Minolta magicolor 4690MF magicolor 4690 Printer/Copier/Scanner User Gui - Page 81
Envelope, DO NOT use thick stock that is, Use envelopes that are, Driver, Media Type, Weight
View all Konica Minolta magicolor 4690MF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Driver Thick Stock 1 Media Type Thick Stock 2 Weight 91 to 210 g/m² (25 to 55.9 lb bond) Duplexing Not supported DO NOT use thick stock that is Mixed with any other media in the trays (as this will cause media misfeeding) Envelope Print on the front (address) side only. Some parts of the envelope consist of three layers of paper-the front, back, and flap. Anything printed in these layered regions may be lost or faded. You can print continuously with envelope. However, this could affect the media feed, depending on the media quality and printing environment. If problems occur, stop the continuous printing and print one sheet at a time. Capacity Tray 1 Up to 10 sheets, depending on their thickness Tray 2/3 Not supported Orientation Face down Driver Envelope Media Type Weight 91 to 163 g/m2 (25 to 43 lb bond) Duplexing Not supported Use envelopes that are Common office envelopes approved for laser printing with diagonal joints, sharp folds and edges, and ordinary gummed flaps " Because the envelopes pass through heated rollers, the gummed area on the flaps may seal. Using envelopes with emulsion-based glue avoids this problem. Approved for laser printing Dry Print Media 69