Kyocera ECOSYS FS-1370DN FS-1370DN Operation Guide (Advanced) - Page 13
Special Paper, Transparency, Labels - test
View all Kyocera ECOSYS FS-1370DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Special Paper The following types of special paper can be used: Paper type to be used Thin paper (60 to 64 g/m²) Thick paper (90 to 220 g/m²) Colored paper Recycled paper Overhead projector transparencies Cardstock Envelopes Label Paper type to be selected Vellum Thick Color Recycled Transparency Cardstock Envelope Labels Use paper that is sold specifically for use with copiers or printers (heatfusing type). When using transparencies, labels, envelopes, cardstock, or thick paper, feed the paper from the MP Tray. Since the composition and quality of special paper vary considerably, special paper is more likely than white bond paper to give trouble during printing. No liability will be assumed if moisture and so forth given off during printing on special paper causes harm to the machine or operator. Note Before purchasing any type of special paper, test a sample on the machine and check that printing quality is satisfactory. Half speed mode is automatically engaged depending on Media types, including Labels, Rough, and Thick. Transparency This printer is available for monochrome printing on transparencies. Transparencies must be fed to the MP Tray. One transparency can be loaded at a time. Transparencies must be able to withstand the heat of fusing during the printing process. Transparencies must be placed on the MP tray with the long edge towards the printer. Paper Handling When unloading transparencies (e.g., for clearing jams), hold them carefully by the edges to avoid leaving fingerprints on them. Labels Labels must be fed to the MP tray. One label can be loaded at a time. The basic rule for printing on adhesive labels is that the adhesive must never come into contact with any part of the machine. Adhesive paper sticking to the drum or rollers will damage the machine. 1-7