Kyocera ECOSYS FS-1370DN FS-1370DN Operation Guide (Advanced) - Page 35
Remove Device (Removing the USB flash memory)
View all Kyocera ECOSYS FS-1370DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Copies 010 Copies (Number of copies) Sets the number of copies printed of the specified file in USB flash memory. IMPORTANT To use this feature, the RAM disk must be set to On. 1 While Copies in step 5 above is displayed, press U and V or Y and Z to display the number of copies. (E.g.: 10) Paper Source ? Cassette 1 Paper Source ? Cassette 2 >Remove Device ? 2 Press [OK]. Paper Source and a question mark (?) appears. Paper Source (Selecting the paper feed source) Sets the paper used for printing the specified file in USB flash memory. 1 While Paper Source in step 2 above is displayed, press U and V or Y and Z repeatedly until the paper source appears. (For example : Cassette 2) Note that menus shown in the list may vary depending on which optional units installed in the printer. 2 Press [OK]. The message Processing appears and the printer prints a file stored in a USB flash memory. Remove Device (Removing the USB flash memory) Specifies the setting for USB flash memory removal. 1 Press Z while USB Memory > is displayed. 2 Press U or V repeatedly until >Remove Device appears. 3 Press [OK]. A question mark (?) appears. >Print File List ? 4 Press [OK] again. Menu display ends and the USB flash memory device can be removed. Print File List (Printing a list of the files on a USB flash memory) This allows you to print a list of the files on a USB flash memory device. 1 Press Z while USB Memory > is displayed. 2 Press U or V repeatedly until >Print File List appears. 3 Press [OK]. A question mark (?) appears. 4 Press [OK] again. The message Processing appears and the printer prints a list of files stored in a USB flash memory. Using the Operation Panel 2-17