Kyocera ECOSYS FS-1370DN FS-1370DN Operation Guide (Advanced) - Page 62
RAStateless RA Stateless setting, DHCPv6 DHCPv6 setting, >>RAStateless, >>DHCPv6
View all Kyocera ECOSYS FS-1370DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
>>RA(Stateless) ? Off >>DHCPv6 ? Off RA(Stateless) (RA (Stateless) setting) The IPv6 router communicates (transmits) information such as the global address prefix using ICMPv6. This information is the Router Advertisement (RA). ICMPv6 stands for Internet Control Message Protocol, and is a IPv6 standard defined in the RFC 2463 "Internet Control Message Protocol (ICMPv6) for the Internet Protocol Version 6 (IPv6) Specification". 1 Press Z while >TCP/IP (IPv6) On > is displayed. 2 Press U or V repeatedly until >>RA(Stateless) appears. 3 Press [OK]. A blinking question mark (?) appears. 4 Select On or Off using U or V. 5 Press [OK]. 6 Press [MENU]. The display returns to Ready. DHCPv6 (DHCPv6 setting) DHCPv6 is the next-generation of the Internet's Dynamic Host Configuration Protocol and supports IPv6. It extends the BOOTP startup protocol that defines the protocols used for transferring configuration information to hosts on the network. DHCPv6 permits the DHCP server to use its expanded functionality to send configuration parameters to an IPv6 node. Because the network addresses that can be used are allocated automatically, the IPv6 node management workload is reduced in systems where the administrator has to exercise close control over IP address allocation. 1 Press Z while >TCP/IP (IPv6) On > is displayed. 2 Press U or V repeatedly until >>DHCPv6 appears. 3 Press [OK]. A blinking question mark (?) appears. 4 Select On or Off using U or V. 5 Press [OK]. 6 Press [MENU]. The display returns to Ready. 2-44 Using the Operation Panel