Kyocera TASKalfa 4501i 3501i/4501i/5501i Operation Guide Rev-1 2013.6 - Page 120

Preparation before Use > Energy Saver function Energy Saver function Low Power Mode and Auto Low Power Mode Low Power Mode To activate Low Power Mode, press the [Energy Saver] key. Touch panel and all indicators on the operation panel will go out to save power except the [Energy Saver], [Power], and Main Power indicators. This status is referred to as Low Power Mode. When the [Power] key is pressed in low power mode, the machine enters the sleep state. Main Power indicator If print data is received during Low Power Mode, the machine automatically wakes up and starts printing. Also when fax data arrives while the machine is in Low Power Mode when using the optional fax, the machine automatically wakes up and starts printing. To resume, perform one of the following actions. • Press the touch panel or any key other than the [Power] key. • Open the platen cover or the optional document processor. • Place originals in the optional document processor. The machine will be ready to operate within 30 seconds. Note that ambient environmental conditions, such as ventilation, may cause the machine to respond more slowly. Auto Low Power Mode Auto Low Power Mode automatically switches the machine into Low Power Mode if left idle for a preset time. The default preset time is 2 minutes. For information on the Low Power Mode settings, refer to Low Power Timer on page 8-54. Energy Saver Recovery Level This machine can reduce power consumption when recovering from Energy Saver Mode. For EnergySaver RecoveryLevel, "Full Recovery", "Normal Recovery" or "Power Saving Recovery" can be selected. The factory default is "Normal Recovery". For more information on Energy Saver Mode settings, refer to EnergySaver RecoveryLevel on page 8-56. 3-14