Kyocera TASKalfa 4501i 3501i/4501i/5501i Operation Guide Rev-1 2013.6 - Page 394

Setup and Registration (System Menu) > System Menu Item EnergySaver RecoveryLevel Weekly Timer Settings Weekly Timer Schedule Retry Times Retry Interval Description Select the method of recovery from energy saver. Value: Full Recovery: This mode enables the use of all functions immediately. However, this mode saves less energy. Normal Recovery: In this mode, you can select the method from the following: enabling the use of all functions immediately or enabling the use of desired functions only. If you want to use all functions immediately, press the [Power] key to execute recovery. Power Saving Recovery: This mode enables the use of desired functions only. This mode saves energy most effectively. Configure settings for switching the machine into Sleep mode and waking it automatically at a specified time for each day of the week. Select whether to use Weekly Timer. Value: Off, On Specify the time for each day of the week at which the machine enters Sleep mode and recovers. Set the number of retry to switch the machine into Sleep mode. Value: Limited Retries, Unlimited Retries NOTE If [Limited Retries] is selected, set the number of retry. The setting range is 0 to 10. Retry is not performed when "0" is set. If [Unlimited Retries] is selected, retry is performed until the machine enters Sleep mode. Set the retry interval. Use [-] / [+] to enter a number. Value: 10 to 60 seconds (increments of 10 seconds) *1 Displayed only when the optional FAX Kit is installed. *2 This is displayed when the optional Card Authentication Kit is installed. *3 Only displayed when the optional Network Interface Kit is installed. 8-56