Kyocera TASKalfa 4501i 3501i/4501i/5501i Operation Guide Rev-1 2013.6 - Page 202

Operation on the Machine > Copying Interrupt Copy This function allows you to pause the current jobs in progress when you need to make copies immediately. When the interruption copy ends, the machine resumes the paused print jobs. NOTE • If the machine is left unused for 60 seconds in interrupt copy mode, interrupt copying is automatically cancelled and printing resumes. You can change the delay until interrupt copying is canceled. Change the delay as required. Interrupt Clear Timer (page 8-55) • The interrupt copy function may be unavailable depending on the status of document finisher usage. In this case, try the priority override. Priority Override (page 6-54) 1 Configure the settings. 1 Press the [Interrupt] key. Copies CoPpryevImieawge Shortcut 1 Place original. Auto 100% Normal 0 OOrrigigininaall : A: 4--ZZoooomm : 1:0100%0% PPaappeerr : A: 4--- PPrreevviieeww Paper Selection 1-sided >>1-sided Duplex Zoom Off Combine Density Off Staple /Punch Quick Setup Org./Paper/ Finishing Image Quality Layout/Edit Advanced Setup Shortcut 2 Shortcut 3 Shortcut 4 Shortcut 5 Shortcut 6 Program The current print job is temporarily interrupted. 2 Place the originals onto the machine for interrupt copy, and configure the copy settings. 2 Press the [Start] key. Interrupt copying begins. 3 When interrupt copying ends, press the [Interrupt] key. The machine resumes the paused print jobs. 5-22