Kyocera TASKalfa 4501i 3501i/4501i/5501i Operation Guide Rev-1 2013.6 - Page 468

Troubleshooting > Troubleshooting J Message Checkpoints Corrective Actions Reference Page Job Accounting restriction exceeded.* Is the acceptable printing count restricted by Job Accounting exceeded? The printing count exceeded the - acceptable count restricted by Job Accounting. Cannot print any more. The job is canceled. Press [End]. Job separator tray is full Is the acceptable storage capacity Remove the paper and press - of paper. exceeded? [Continue]. Printing then resumes. Is the paper curled? Check the checkpoints of "Printouts are curled." in Solving Malfunctions and take the corrective actions. page 10-20 * When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. K Message Checkpoints Corrective Actions KPDL error. * ― PostScript error has occurred. The job is canceled. Press [End]. * When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. Reference Page ― M Message Checkpoints Corrective Actions Reference Page Machine failure. ― Mailbox tray is full of paper. Main unit inner tray is full of paper. Is the acceptable storage capacity exceeded? Is the acceptable storage capacity exceeded? Is the paper curled? Main unit upper left tray is full of paper. Maximum number of scanned pages. Is the acceptable storage capacity exceeded? Is the acceptable scanning count exceeded? Memory is full.* - - Internal error has occurred. Make a note of the error code displayed on the screen. Call service. Remove the paper. Printing then resumes. Remove the paper. Printing then resumes. Check the checkpoints of "Printouts are curled." in Solving Malfunctions and take the corrective actions. Remove the paper and press [Continue]. Printing then resumes. Cannot scan pages any more. Follow the instructions on the screen. The memory is full and the job cannot be continued. Press [Continue] to print the scanned pages. The print job cannot be processed completely. Press [Cancel] to cancel the job. The process cannot be performed due to insufficient memory. If only [End] is available, press [End]. The job will be canceled. ― - - page 10-20 - - - - * When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. 10-28