Kyocera TASKalfa 4501i 3501i/4501i/5501i Operation Guide Rev-1 2013.6 - Page 438
Apply Limit, Copier/Printer Count
View all Kyocera TASKalfa 4501i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 438 highlights
User Authentication and Accounting (User Login, Job Accounting) > Job Accounting Setting Apply Limit This specifies how the machine behaves when the counter has reached the limit of restriction. The table below describes the action taken. Item Immediately* Subsequently Descriptions Job stops when the counter reaches its limit. Printing/scanning of the job continues but the subsequent job will be rejected. Alert Only Job continues while displaying an alert message. * The next job will be prohibited in sending or in storing in the box. 1 Display the screen. 1 Referring to Job Accounting Setting on page 9-27, display the job accounting access screen. 2 Press [Change] of "Apply Limit". 2 Configure the settings. 1 Select [Immediately], [Subsequently], or [Alert Only]. 2 Press [OK]. Copier/Printer Count You can select how the copying and printing page counts are shown - either the total of both or each of copying and printing individually. The selection may influence restriction on the count and count method. For details, refer to Restricting the Use of the Machine (page 9-34), Counting the Number of Pages Printed (page 9-38), and Print Accounting Report (page 9-31). 1 Display the screen. 1 Referring to Job Accounting Setting on page 9-27, display the job accounting access screen. 2 Press [Change] of "Copier/Printer Count". 2 Configure the settings. 1 Press [Total] or [Individual]. 2 Press [OK]. 9-40