Kyocera TASKalfa 4501i 3501i/4501i/5501i Operation Guide Rev-1 2013.6 - Page 352

Setup and Registration (System Menu) > System Menu For Custom 1-8, settings for duplex printing and media type name can be changed. Item Duplex Print Prohibit Permit Name Description Duplex printing not allowed. Duplex printing allowed. Change names for Custom 1-8. Names should be not more than 16 characters. Selecting media type at multi purpose tray, the name after change will be displayed. Character Entry Method (page 11-10) Measurement Common Settings Item Measurement Description Select inch or metric for the unit for paper dimensions. Value: mm, inch Error Handling Common Settings Item Duplexing Error Finishing Error No Staple Error Finished Pages Exceeded Description Set what to do when duplex printing is not possible for the selected paper sizes and media types. Value 1-sided: Printed in 1-sided Display Error: Message to cancel printing is displayed. Set alternative actions when finishing (Staple/Punch/Offset/Fold/Auto Image Rotation) is not available for the selected paper size or media type. Value Ignore: The setting is ignored and the job is printed. Display Error: Message to cancel printing is displayed. Set what to do when staples run out during printing. Value Ignore: Printing continues without stapling. Display Error: Message to cancel printing is displayed. NOTE Requires the optional 1,000-Sheet Finisher or 4,000-Sheet Finisher. Set what to do when finishing (stapling or offsetting) capacity is exceeded during printing. Value Ignore: Printing continues without finishing. Display Error: Message to cancel printing is displayed. NOTE Requires the optional 1,000-Sheet Finisher or 4,000-Sheet Finisher. 8-14