Kyocera TASKalfa 4501i 3501i/4501i/5501i Operation Guide Rev-1 2013.6 - Page 253

Operation on the Machine > Manual Staple Manual Staple You can staple copied paper manually without any print operation. It is useful when you have forgotten to set the staple sort mode before starting copying, or when you want to staple originals. NOTE If there are no staples when manual stapling is performed, the stapling position lamps and stapling position key LEDs all blink. Add staples. For details, refer to Replacing Staples on page 10-12. Manual stapling cannot be executed when the machine is in operation. Maximum number of sheets available for manual stapling Paper size A4, A4-R, B5, Letter, 16K A3, B4, Folio - 90 g/m2 (- 24.0 lb. Bond) 65 sheets 30 sheets Paper weight 91 - 105 g/m2 (24.3 - 28.0 lb. Bond) 50 sheets 30 sheets Use the keys on the control section of the 4,000-Sheet Finisher (optional) for manual stapling. Stapling position lamps Stapling position key Stapling key / lamp 1 Press the stapling position key on the stapling control section. The shutter of the paper exit area is opened and this equipment enters into the manual staple mode. 2 Set the staple position. Press the stapling position key to select the stapling position (Back / Front / 2 Points ). Operation is not possible while the stapling position lamps are blinking. Operate after the lamps light solidly. 5-73