Kyocera TASKalfa 4501i 3501i/4501i/5501i Operation Guide Rev-1 2013.6 - Page 353

Setup and Registration (System Menu) > System Menu Item Punch Waste Full Error Paper Mismatch Error Inserted Paper Mismatch Paper Jam before Staple Skewed originals Description Set what to do when the punch waste box becomes full during printing. Value Ignore: Printing continues without punching. Display Error: Message to cancel printing is displayed. NOTE Requires the optional 1,000-Sheet Finisher or 4,000-Sheet Finisher. Set what to do when the selected paper size or type does not match paper size or type loaded in the specified paper source while printing from the computer by specifying the cassette or multi-purpose tray. Value Ignore: The setting is ignored and the job is printed. Display Error: Message to cancel printing is displayed. Set what to do when it is detected that the cassette paper size setting does not match the actual paper size that is fed. Value Ignore: The setting is ignored and the job is printed. Display Error: Message to cancel printing is displayed. The page from which printing is resumed when a paper jam occurs during a job with stapling can be selected. Value Resume at Top of Page: Resume printing from the first page of the document. Resume at Jammed Page: Resume printing from the page where the jam occurred. NOTE Requires the optional 1,000-Sheet Finisher or 4,000-Sheet Finisher. When skewed originals while scanning, select whether to print by ignoring the error or display an error. Value Ignore: The error is ignored and the job is printed. Display Error: Error message to cancel scanning is displayed. NOTE This setting is displayed when an optional document processor (dual scan DP) is installed. 8-15