Kyocera TASKalfa 4501i 3501i/4501i/5501i Operation Guide Rev-1 2013.6 - Page 272

Using Various Functions > Functions Staple/Punch Copy Org./Paper/ Finishing Custom Box Functions USB Memory Functions Staple Staples the finished documents. The staple position can be selected. Item Value Description Staple Top Left Top Right 2 staples Left Select the staple position. For details on original orientation and staple position, refer to Original Orientation and Staple Position on page 6-18. 2 staples Top 2 staples Right Saddle Stitch Select whether to fold the finished documents in two with staples in the center. When placing originals, be sure to place the cover page at the bottom. For details on saddle stitching, refer to Booklet on page 6-35. Original Orientation Top Edge on Top, Top Edge on Left Select the orientation of the original document top edge to scan correct direction. Press [Original Orientation] to choose orientation of the originals, either [Top Edge on Top] or [Top Edge on Left]. Then press [OK]. NOTE Stapling requires the optional 1,000-Sheet Finisher or 4,000-Sheet Finisher. Note also that saddle stitching (center stapling) requires the folding unit. For details on paper sizes and numbers of sheets that can be stapled, refer to 1,000-Sheet Finisher (Option) on page 11-28 or 4,000-Sheet Finisher (Option) on page 11-29. Original Orientation and Staple Position Original orientation Top Edge on Top Top Edge on Left Paper orientation Cassette paper load direction Cassette paper load direction NOTE B5-R and 16K-R "one staple" is not diagonal. 6-18