Kyocera TASKalfa 4501i 3501i/4501i/5501i Operation Guide Rev-1 2013.6 - Page 381
System/Network, Network
View all Kyocera TASKalfa 4501i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 381 highlights
Setup and Registration (System Menu) > System Menu System/Network Configure machine system settings. Network System/Network Configure network settings. Host Name Item Host Name Description Check the host name of the machine. Host name can be changed from Command Center RX. Changing Host Name (page 2-36) TCP/IP Setting TCP/IP Item IPv4 IP Address Subnet Mask Default Gateway DHCP Auto-IP Description Select whether to use TCP/IP Protocol. Value: Off, On Set up TCP/IP (IPv4) to connect to the network. This setting is available when [TCP/IP] is set to [On]. Set the IP addresses. Value NOTE When DHCP is set to [On], this function will be grayed out and the value cannot be entered. Set the IP subnet masks. Value NOTE When DHCP is set to [On], this function will be grayed out and the value cannot be entered. Set the IP gateway addresses. Value NOTE When DHCP is set to [On], this function will be grayed out and the value cannot be entered. Select whether to use the DHCP (IPv4) server. Value: Off, On Select whether to use Auto-IP. Value: Off, On IMPORTANT After changing the setting, restart the network or turn the machine OFF and then ON. 8-43