Lantronix IntelliBox-I/O IntelliBox-I/O - User Guide - Page 147
EventTrak Control, Step A Settings, Description
View all Lantronix IntelliBox-I/O manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
13: EventTrak Pages The additional settings are described below: Table 13-4 EventTrak Control Step Settings EventTrak Control Step A Settings Advance to Step "B" if Description This setting defines the event that will cause EventTrak to move to the next step. When you use an option, the Upon Advance setting displays. Note: In Step "B", this is entitled Advance to Step "C" if. In Step "C", this is entitled Advance to Step "D". Choices are: Never = there is no event that advances to the next step. Match String "x" = tells EventTrak to monitor the serial port and advance if it detects a specific string. The choices are Match String 1, Match String 2 or Match String 3. (See EventTrak - Monitoring Page for instructions on defining match strings.) Line outputs data = advances if data is sent out the serial port. Tunnel accepts connection = tells EventTrak to advance if the IntelliBox accepts a TCP connection to its serial port. Tunnel accepts disconnection = tells EventTrak to advance if a TCP connection to its serial port is disconnected. Ping Response = tells EventTrak to advance if the IntelliBox receives a ping response. This setting works in conjunction with the initial action of Ping per second. Timeout expires = tells EventTrak to wait a configurable amount of time before advancing. This is useful when you want to pause EventTrak to wait for an event or gather serial data for automated reporting. You can configure the timeout as milliseconds, seconds or minutes. The maximum length of a timeout is 10080 minutes (7 days). Triggered by task "x" = allows EventTrak to advance when another triggers it. Upon Advance Externally triggered = Allows EventTrak to advance when another task on another EventTrak triggers it. This setting tells EventTrak what actions to take when a detected event causes EventTrak to move to the next step. Note: Upon Advance happens at the same time as moving to the next step. The Upon Advance box displays when you select Advance to step "x". Note: You can add multiple actions. Choices are: Send Email = tells EventTrak to send an email when it detects an event. When you select an option, the following additional configurable items display: No Email removes Send email as an action in response IntelliBox-I/O 2100 User Guide 147