Lantronix IntelliBox-I/O IntelliBox-I/O - User Guide - Page 73
Tunnel - Modem, Emulation Settings, Description, Table 7-10 Tunnel - Modem Emulation
View all Lantronix IntelliBox-I/O manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
7: Network, Serial Line, Tunnel, and Modbus Settings Table 7-10 Tunnel - Modem Emulation Page Tunnel - Modem Emulation Page Settings Echo Pluses Echo Commands Verbose Response Codes Response Codes Error Unknown Commands Incoming Connection Connect String Display Remote IP Description Select whether the modem +++ escape sequence is echoed (sent). Choices are: On = modem pluses are sent into the network. Off = modem pluses are suppressed. (default). Select whether modem commands are echoed on the serial line. Choices are: On = modem commands are echoed. (default) Off = modem commands are not echoed. Select whether modem response (result) codes are sent on the serial line. Choices are: Text = modem responses are sent on the serial line. (default) Numeric = modem responses are not sent. Select whether modem response (result) codes sent on the serial line take the form of words or numbers. Choices are: Text = modem responses are sent as words. (default) Numeric = modem responses are sent as numbers. Select whether an ERROR or OK response is sent in reply to unrecognized AT commands. Choices are: On = ERROR is returned for unrecognized AT commands. Off = OK is returned for unrecognized AT commands. (default) Select how to manage incoming requests. Choices are: Disabled = disable requests (ATS0=0) Automatic = automatically answer requests (ATS0=1) Manual = manually answer requests via the ATA command after an incoming RING (ATS0=2) If required, enter a customized string that is sent along with the CONNECT response code. Default is . Select whether to enable an incoming RING followed by the IP address of the caller. Choices are: Enabled Disabled IntelliBox-I/O 2100 User Guide 73