Lantronix IntelliBox-I/O IntelliBox-I/O - User Guide - Page 57
Network, Serial Line, Tunnel, and Modbus Settings, IntelliBox-I/O 2100 User Guide, Hardware, Software
View all Lantronix IntelliBox-I/O manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
7: Network, Serial Line, Tunnel, and Modbus Settings Line - Configuration Page Settings Stop Bits Flow Control Xon char Xoff char Description Select the number of stop bits used by the currently selected serial line. Choices are: 1 (default) 2 For the Modbus protocols, the default is 1; this setting automatically changes to 2 if parity is None. Select the flow control method used by the currently selected serial line. Choices are: None (default for Tunnel protocol) Hardware (commonly called CTS/RTS) Software (commonly called Xon/Xoff) On Line 1, for the Modbus protocols, Flow Control defaults to None; this setting cannot be changed. On Line 2, Flow Control is unavailable for all protocols. Character to use to initiate a flow of data. When Flow Control is set to Software, specify Xon char. Prefix a decimal character with \ or a hexadecimal character with 0x, or provide a single printable character. The default Xon char is 0x11. When Flow Control is set to Software, specify Xoff char. Prefix a decimal character with \ or a hexadecimal character with 0x, or provide a single printable character. The default Xoff char is 0x13. IntelliBox-I/O 2100 User Guide 57