Lantronix IntelliBox-I/O IntelliBox-I/O - User Guide - Page 68

Tunnel - Connect, Mode Settings, Description, Disable, Always, Any Character

Get Lantronix IntelliBox-I/O PDF manuals and user guides View all Lantronix IntelliBox-I/O manuals
Add to My Manuals
Save this manual to your list of manuals

Page 68 highlights

7: Network, Serial Line, Tunnel, and Modbus Settings Table 7-7 Tunnel -- Connect Mode Settings Tunnel - Connect Description Mode Page Settings Mode Select the method used to start a tunnel in Accept Mode. Choices are: Disable = do not accept an incoming connection. Always = accept an incoming connection. (default) Any Character = start waiting for an incoming connection when any character is read on the serial line. Start Character = start waiting for an incoming connection when the start character for the selected tunnel is read on the serial line. Modem Control Asserted = start waiting for an incoming connection as long as the Modem Control pin (DSR) is asserted on the serial line until a connection is made. Modem Emulation = start waiting for an incoming connection when triggered by modem emulation AT commands. Connect Mode must also be set to Modem Emulation. Remote Address Enter the address of the remote host to which the selected tunnel will connect. Default is . Remote Port Enter the number of the remote port to which the selected tunnel will connect. Default is . Local Port Enter the number of the local port used to receive (or listen for) packets. Random by default, but can be overridden. Protocol Select the protocol to be used on the connection. Choices are: TCP (default) SSH SSL TCP TCP/AES Telnet UDP UDP/AES TCP Keep Alive Specifies the number of milliseconds the IntelliBox waits during an inactive connection before checking the status of the connection. If the IntelliBox does not receive a response from the remote host, it drops that connection. AES Encrypt Key Specify the Advanced Encryption Standard (AES) key string to be used for encrypting outgoing data in Connect Mode tunneling. Then, select the key form: Text Hexadecimal AES Decrypt Key Specify the Advanced Encryption Standard (AES) key string to be used for decrypting incoming data in Connect Mode tunneling. Then, select the key form: Text Hexadecimal IntelliBox-I/O 2100 User Guide 68

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
7: Network, Serial Line, Tunnel, and Modbus Settings
IntelliBox-I/O 2100 User Guide
68
Table 7-7 Tunnel -- Connect Mode Settings
Tunnel – Connect
Mode Page
Settings
Description
Mode
Select the method used to start a tunnel in Accept Mode. Choices
are:
Disable
= do not accept an incoming connection.
Always
= accept an incoming connection. (default)
Any Character
= start waiting for an incoming connection when any
character is read on the serial line.
Start Character
= start waiting for an incoming connection when the
start character for the selected tunnel is read on the serial line.
Modem Control Asserted
= start waiting for an incoming connection
as long as the Modem Control pin (DSR) is asserted on the serial line
until a connection is made.
Modem Emulation
= start waiting for an incoming connection when
triggered by modem emulation AT commands. Connect Mode must
also be set to
Modem Emulation
.
Remote Address
Enter the address of the remote host to which the selected tunnel will
connect. Default is <none>.
Remote Port
Enter the number of the remote port to which the selected tunnel will
connect. Default is <none>.
Local Port
Enter the number of the local port used to receive (or listen for)
packets. Random by default, but can be overridden.
Protocol
Select the protocol to be used on the connection. Choices are:
TCP
(default)
SSH
SSL
TCP
TCP/AES
Telnet
UDP
UDP/AES
TCP Keep Alive
Specifies the number of milliseconds the IntelliBox waits during an
inactive connection before checking the status of the connection. If
the IntelliBox does not receive a response from the remote host, it
drops that connection.
AES Encrypt Key
Specify the Advanced Encryption Standard (AES) key string to be used
for encrypting outgoing data in Connect Mode tunneling.
Then, select the
key form:
Text
Hexadecimal
AES Decrypt Key
Specify the Advanced Encryption Standard (AES) key string to be used
for decrypting incoming data in Connect Mode tunneling.
Then, select the
key form:
Text
Hexadecimal