Lantronix XPress-DR-IAP XPress-DR / XPress-DR-IAP - User Guide - Page 104
Channel Parameters, Table 26 - Channel Parameters
View all Lantronix XPress-DR-IAP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
UDP 8.3.1 Channel Parameters Use the following table to select setup record parameters for Channels 1: Table 26 - Channel Parameters Byte(s) (Channel 1) 16 17 18 19 20-21 22-23 24-27 28 29 30 31 32-33 34 35 36-47 48-63 Function Interface Mode (see Table 27 - Interface Mode Options) Line Speed Bits 7-5: Reserved Bits 4-0: Baud Rate (see Table 29 - Baud Rate Settings) Flow Control (see Table 30 - Flow Control Options) Reserved Own TCP port low-byte, high-byte (Intel) Remote TCP port low byte, high-byte (Intel) Remote IP address (low/high low/high) Connect Mode (see Table 31 - Connect Mode Options) Disconnect Mode (see Table 32 - Disconnect Mode Options) Disconnect w/ inactivity time-out, minutes (00 if unused) Disconnect w/ inactivity time-out, seconds (00 if unused) Characters to trigger send immediately (sendchar) Flush mode (see Table 33 - Flush Mode Options) Pack Control (see Table 34 - Pack Control Options) Reserved (0) a) Terminal name for Telnet terminal type option (15 characters max), 0-terminated. If set and Bit 6 in Disconnect Mode is set, Telnet connection will be assumed. b) Password for Passworded Socket Connection (Bit 4 in Disconnect Mode Set). 8-8 DSTni-XPress DR User Guide