Lantronix XPress-DR-IAP XPress-DR / XPress-DR-IAP - User Guide - Page 79

Via TFTP, 2.3 Via Another Unit, TFTP Dialog Box

Get Lantronix XPress-DR-IAP PDF manuals and user guides View all Lantronix XPress-DR-IAP manuals
Add to My Manuals
Save this manual to your list of manuals

Page 79 highlights

Firmware 4.2.2 Via TFTP To download new firmware from a computer: 1. Use a TFTP client to send a binary file to the unit (*.ROM to upgrade the unit 's internal operational code and *.COB to upgrade its internal Web interface). Note: TFTP requires the .ROM (binary) version of the unit's internal operational code. 2. Make sure the Put and Binary options at the top of the window are selected. 3. Enter the full path of the firmware file in the Source File field. 4. In the Destination File field, enter the current internal operational code or WEB5 for the internal Web interface. (DA=XPress Family IAP) 5. In the Remote Host field, enter the IP address of the unit being upgraded. 6. Click the Put button to transfer the file to the unit. Figure 20 - TFTP Dialog Box The unit performs a power reset after the firmware has been loaded and stored. 4.2.3 Via Another Unit To distribute firmware to another unit over the network: 1. Enter the host unit's Monitor Mode (see Monitor Mode on page 7-1). 2. Send the firmware to the receiving unit using the SF command, where x.x.x.x is the receiving unit's IP address. SF x.x.x.x The receiving unit performs a power reset after the firmware has been loaded and stored. Note: You can only update your unit 's internal Web interface using TFTP or Device Installer. DSTni-XPress DR User Guide 4-5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
Firmware
4.2.2 Via TFTP
To download new firmware from a computer:
1.
Use a TFTP client to send a binary file to the unit (*.ROM to upgrade the unit ’s internal
operational code and *.COB to upgrade its internal Web interface).
Note: TFTP requires the
.ROM
(binary) version of the unit's internal operational code.
2. Make sure the
Put
and
Binary
options at the top of the window are selected.
3.
Enter the full path of the firmware file in the
Source File
field.
4. In the
Destination File
field, enter the
current
internal operational code or
WEB5
for
the internal Web interface. (DA=XPress Family IAP)
5. In the
Remote Host
field, enter the IP address of the unit being upgraded.
6. Click the
Put
button to transfer the file to the unit.
Figure 20 - TFTP Dialog Box
The unit performs a power reset after the firmware has been loaded and stored.
4.2.3 Via Another Unit
To distribute firmware to another unit over the network:
1.
Enter the host unit’s Monitor Mode (see
Monitor Mode
on page
7-1
).
2.
Send the firmware to the receiving unit using the
SF
command, where x.x.x.x is the
receiving unit’s IP address.
SF x.x.x.x
The receiving unit performs a power reset after the firmware has been loaded and stored.
Note:
You can only update your unit 's internal Web interface using TFTP or Device
Installer.
DSTni-XPress DR User Guide
4-5